Out of sight must not be out of mind


Corrosion affects all concrete buildings and structures around the world

They deteriorate at varying rates over time, depending on the material used, the types of corrosive agents in the environment and the physical processes and mechanisms involved.

Globally, the estimated annual cost of concrete corrosion to industry is billions of dollars.

The smooth, shiny appearance of tanks and pipework you might see at a manufacturing facility or construction site may seem pristine and safe, but often under the surface is insulation, water, a protective coating and significant amounts of corrosion.

Corrosion Under Insulation (CUI) is a pervasive but insidious form of metals corrosion.

Most industrial or commercial facility—from the largest refineries and chemical plants to a local hospital or neighbourhood bakery—has insulated equipment.

There are many reasons equipment is insulated, including energy conservation, production process stability or personnel protection, whether the product inside is hot, cold, or cycles between temperature extremes.

Wherever insulation is used, there will be some amount of corrosion under it.

Unchecked CUI can cause thinning of the metal wall of a pipe or vessel which may lead to catastrophic perforation or rupture; the effects of which are increased where the vessel or pipe contains flammable or poisonous product under pressure.

Industrial insulation is a system composed of an outer protective jacketing, one or more layers of insulation, and a protective coating applied to the metal substrate.

Even after taking every precaution during the design, construction and operation of an asset, every insulation project will sooner or later be affected by CUI.

And unlike “normal” corrosion, CUI is hidden under the insulation and jacketing and is not readily visible—out of sight and too often out of mind.

The high cost of replacement insulation, labour, and operational downtime time means that only a small percentage insulated area is ever opened up for visual inspection.

The rest of the area may be inspected using various electronic means, which may or may not give accurate indications of CUI.

Parts of an insulated area may not be visually inspected at all during the expected 15 to 18-year service life of an asset threatened by CUI.

In Australia alone, the yearly cost of asset maintenance is estimated to be approximately $32 billion.

Avoidable corrosion damage, such as CUI, accounts for $8 billion of this and continues to have a major economic impact on industry and the wider community.

Each year around the world there are hundreds of failures and incidents—to varying degrees of severity—caused by CUI.

It is important that owners of high-value assets understand the cost implications of ignoring the effects of corrosion under insulation.

Organisations require effectively trained staff who have an understanding of the numerous types of corrosion that affect their industry and of the preventative and remediation technology available.

As part of its charter, the Australasian Corrosion Association (ACA) presents a continual programme of technical seminars and training courses each year.

The ACA is presenting a series of two-day technical workshops dealing with CUI in June this year.

The workshops will be presented by international CUI specialist and consultant Peter Bock from Houston, who has more than 30 years’ experience in elevated temperature coatings and CUI and has published numerous articles as well as spoken at NACE, SSPC, ICC and other national and international conferences regarding CUI problems and solutions.

Held in Perth (19-20 June), Sydney (25-26 June) and New Plymouth (28-29 June), the workshop is dedicated to design, specification and inspection of corrosion control systems to prevent CUI in new or aged equipment and will cover topics such as the causes of CUI, current state-of-the-art CUI coating systems, inspecting and evaluating aged CUI in the field and appropriate CUI repair coating systems.

Places are still available for the workshops and bookings can be made via the ACA website until 25 May at www.corrosion.com.au/events. The full programme is available through the web site.


The ACA is a not-for-profit, membership Association which provides training, seminars, conferences, publications and other activities to disseminate information about corrosion and its prevention or control.